Full Service

Items Covered

Bodywork Exterior

This includes checking:

  • Condition and security of body panels.

  • Operation of door locks, catches and hinges and lubricate.

  • Condition and security of all trims, inserts and sealants.

  • Windows and seals for damage.

  • Condition and security of grab handles.

  • Check security of body attachments (ladders, aerials, cycle racks etc).

Water System and Appliances

This includes checking:

  • Operation and condition of water pump.

  • Operation of pressure switch and adjust if required.

  • Condition of water filter and housing.

  • Operation of taps and shower fittings (including external taps if fitted).

  • Overall condition of fresh and waste water pipes and fittings.

  • Toilet for operation and condition of seal, blade and flush.

  • Drain plugs for seal and operation (Drain down system in winter).

Electrical Systems 240v

This includes checking:

  • Condition of inlet plug and hook up cable (when available).

  • Operation of RCD, MCB’s and earth bonding.

  • Condition of wiring, sockets and fixed connections.

  • Operation of battery charger.

  • Mains operation of fridge.

  • Mains operation of cooker and hob.

  • Mains operation of water heater.

  • Mains operation of space heater.

Electrical Systems 12v

This includes checking:

  • Condition of battery & containment.

  • Condition of wiring, sockets and fuses.

  • Operation of all 12v lights including awning light.

  • Operation of blown air system.

  • Condition of 12N and 12S or 13pin plugs and cables.

  • Condition and operation of road lights and reflectors.

  • Function of 12S system (charging, fridge, lights etc).


Fire and safety

This includes checking:

  • Position and operation of smoke and CO alarm.

  • Condition, type and expiry date of fire extinguisher.

  • Condition and location of fire blanket.

  • Operation, function and safety of DIY additions.

Bodywork Interior

This includes checking:​

  • Floor for delamination.

  • Operation of cupboard hinges, catches, locks and stays.

  • Operation and condition of all window catches, stays and seals.

  • Operation and security of all skylights.

  • Operation of blinds and fly screens.

  • Fixed ventilation openings for free flow of air.

  • Damp meter test.

Gas Supply and Appliances

This includes checking:

  • Regulator performance and carry out leak test.

  • Condition and date of flexible hose.

  • Condition and security of all pipe work.

  • Condition of LPG sticker on locker and security of gas bottles.

  • Gas dispersal holes for obstructions.

  • Operation of cooker, hob and oven. Ignition, flame and flame failure device (FFD)

  • Fridge ignition, FFD and cooling (Fridge not serviced unless requested).

  • Operation of space heater. Ignition, flame and FFD.

  • Operation of water heater. Ignition, flame, FFD and heating.

  • Operation and condition of external gas point if fitted.

  • CO Room Test (Room Sealed Appliances Only)

Chassis and Running Gear

This includes checking:

  • Coupling head and safety catch for wear and lubricate if required.

  • Check and clean pads on ball acting stabiliser.

  • Condition and routing of breakaway cable and clip.

  • Operation of overrun piston and lubricate.

  • Operation of jockey wheel and lubricate.

  • Operation of handbrake and lubricate.

  • Check brake rods, cables and supports.

  • Remove wheels and check tyres for wear, damage, age and pressure.

  • Remove brake drums check bearings, seals and linings. Clean and lubricate.

  • Replace drum with new split pin or one shot nut and torque as required.

  • Adjust brakes at drum and check free play in the linkage and at handbrake.

  • Replace road wheels and torque wheel nuts / bolts to manufacturers settings.

  • Condition and security of chassis and attachment to body.

  • Operation of suspension assemblies.

  • Corner steadies operation and lubricate.

  • Spare wheel carrier and folding step for operation and lubricate.


This includes checking:

  • Age and condition.

  • Tread depth (mm).

  • Pressure (PSI).

  • Torque Settings.